» Safety pallet gate

Safety pallet gate

The transfer of loads between different levels is a subject that is becoming increasingly topical, because reception platforms are often not equipped with appropriate protection (CPE - collective protective equipment). After all, a simple rope or chain is absolutely not enough to guarantee operator safety!

To ensure complete and optimum protection for the operator and the loads, all you need to do is install a safety gate (pallet lock gate) which closes the edge of the void in the rest position.

Whether tilting, sliding, lifting or rotating, we have models to suit every situation.
Lorel, the hero of our AC2M-comics

Discover them all in the products below!

Our safety gates type SG1, SG3, SG4 et SG5 are tested by TÜV SÜD Product Service GmbH (German inspection and certification body) and APAVE (French inspection body).

AC2M is at your disposal to guarantee safe work at height!

Filter by

x Reset

First step: how do you choose the lock gate you need?	Swinging safety pallet gate type SG1
Swinging robust safety pallet gate type SG2	Lifting safety pallet gate type SG3
Vertically sliding safety gate type SG4	Folding swinging safety pallet gate type SG5
Safety pallet gate forming a door type SG6	Swinging safety pallet gate type SG0 without protrusion
Rotating safety pallet gate type SGCIR

Newest arrivals See all our news

Swinging "go through" safety pallet gate type SG5X

Safety pallet gate type SG5 - swinging "go through"

The SG5 type safety pallet gate is a "go-through" version of the SG5 type: it can be installed on either side of a wall.

It can accomodate high loads under low ceilings.

Different versions and finishes are available.

Folding and tilting safety pallet gate type SG51

Safety pallet gate type SG51 - swinging and folding/tilting

The SG5 safety pallet gate is a swinging folding pallet gate on the front and a swinging gate at the back.

Thanks to its kinematics, it frees up space at the top for loads on the edge of the void.

It can be installed behind a door or even behind a metal curtain.

SG44 pallet gate for maximum depth on the platform

Safety pallet gate type SG44 - vertically sliding and folding

The SG44 safety gate has a vertically sliding guardrail at the front and a folding guardrail at the back.

This frees up maximum space on the platform, both in terms of depth and height.

Loads can be picked up from three sides or even from above by using a hoist.

This pallet gate is tailor-made to meet your specific requirements.

Pallet gate SG3T going through a wall or a door

Safety pallet gate type SG3T - lifting "go through"

The SG3T safety gate allows a load handling through a door or a wall.

A lifting guardrail is fitted on either side of the wall.

It is made to measure.

The pallet gate is operated manually, but can also be automated (optional).

SG3A pallet lock for angled load handling

Safety pallet gate type SG3A - lifting at an angle

The SG3A type safety pallet gate is a lifting gate with the special feature of allowing loading and unloading via guardrails at an angle rather than facing each other.

The movable guardrails are at right angles to each other, making them ideal for installation in corridors or areas with limited space.

It is made to measure and can be operated manually (automation optional).

Safety pallet gate type SG14 - swinging and folding

The SG14 safety gate is a combination of a swinging pallet gate on one side and a folding gate on the other.

It frees up space in the depth of the platform.

The gate is operated manually (or automatically, depending on the option).

Various accessories and options are at your disposal.

The pallet gate type SG1 can be made to measure

Tailor-made tilting safety gate type SG1

SG1 type safety gates are available in standard sizes, but can also be made to measure.

Pallet gate SG1 for several pallets simultaneously

Safety pallet gate type SG1 large width or depth - swinging

The safety pallet gate type SG1 large width or depth allows the passage of several pallets simultaneously.

It is entirely custom-designed and manufactured.

Manual operation (automation optional).

Various options and accessories available.

Safety pallet gate type SGCIR - rotating

The SGCIR type safety gate is a pallet gate designed for the transfer of very high loads.

It is highly ergonomic and attractive in its design.

Dimensions are tailor-made according to customer requirements.

Pallet gate SG0 swinging but without protrusion

Safety pallet gate type SG0 - swinging without protrusion

The SG0 type safety pallet gate without protrusion is recommended for work situations with low ceilings.

It can also be used in complex work situations.

This pallet gate operates manually, but can be automated (option).

Safety pallet gate type SG6 - forming a door

The SG6 safety pallet gate combines two functions: safety lock gate and cladding door on a façade opening.

It can also be fitted with wire mesh on the front.

Made in France, it is entirely made to measure.

SG5 pallet gate for low ceiling platforms

Safety pallet gate type SG5 - folding and swinging

The SG5 type safety pallet gate is a device with folding rails designed for workstations with restricted ceiling heights.

It can be used to handle high pallets under low ceilings.

The safety gate can also be installed behind sliding doors or curtains.

The three rails of the guardrail are grouped together next to each other.

COOKIES POLICY